Ice Servuce - Frigidaire FGTR2044QF1 Use & Care Manual

Ifyour r efrigerator has anautomatic ice maker,
minimal ice will b eproduced during the first 2 4
hours ofoperation. Airinnew plumbing lines
may c ause the ice maker tocycle two orthree
times b efore making afull t ray ofice. With no
usage, itwill t ake approximately one totwo
days tofilltheice container.
New plumbing connections may c ause the first
production ofice cubes tobediscolored or
have a nodd flavor. Discard ice made during
the first 2 4hours.
Automatic ice makers are also optional
accessories that m ay beinstalled inmost
models atany time. Call your local dealer for
information.
Turning your Ice Maker On
After the plumbing connections have been
completed, the water supply valve must be
opened. Place the ice container under the
ice maker, pushing it as far back as possible.
Lower the wire signal arm to its "down" or ON
position.
Turning your Ice Maker Off
To stop the ice maker, lift the wire signal
arm until it clicks and locks in the "up" or
OFF position. The ice maker also turns off
automatically when the ice container is full.
Your ice maker is shipped from the factory
with the wire signal arm in the ON position.
To ensure proper function for your ice maker,
hook up water supply immediately or turn ice
maker OFF by lifting the wire signal arm until
it clicks and locks in the UP position. If the
ice maker is on and the water supply is not
connected, the water valve will make a loud
chattering noise.
ICE PRODUCTION: WHAT
TO EXPECT
The ice maker will produce 2.5 to 3 pounds
of ice every 24 hours depending on usage
conditions. Ice is produced at a rate of 8 cubes
every 80 to 160 minutes.
ignal Arm
Do Not place the ice container in your
dishwasher.