8. Installing The Belt Guard {L); 9. Installing The Thread Stand - Consew 206RBL-18 Operating Instructions & Parts Book

4-8. Installing the belt guard (ll
4-9. Installing the thread stand
1. Tilt back the machine head. and then remove the
V-belt from the motor pulley.
2. While tilting the machine forward. insert belt guard
(l)
0
into the belt guard
fJ
from underneath, and
let it rest there.
3. Place the V-belt back onto the pulley.
4. Install belt guard (L)
0
with the two screws
0
so
that there is no clearance between the belt guard
fJ
and belt guard (L)
0
(position
0),
and so that
the reverse lever
e
and the belt guard
fJ
are not
touching (positions
®
and @).
Assemble the thread stand as shown in the illustra-
tion, and then install it to the work table.
*
Securely tighten the nut
0
so that the thread stand
does not move.