Areas Of Use; Starting And Operation; Filling The Fuel Tank - Castelgarden XM130 Instructions For Use Installation And Servicing

EN
3.7 IGNITION LOCK (7:U)
Ignition lock used for starting/stopping the engine.
Four positions:
1. Stop position – the engine is short-
circuited. The key can be removed.
2/3. Operating position.
4. Start position – the electric start motor
is activated when the key is turned to the
spring-loaded start position. Once the
engine has started, let the key return to
operating position 2/3.
3.8 GEAR LEVER (7:R) (Man)
A lever for selecting one of the five forward gears
in the gearbox (1-2-3-4-5), neutral (N) or reverse
(R).
The clutch pedal must be kept pressed in when
changing gear.
NOTE! You must make sure the machine is quite
stationary before changing from reverse to forward
gear or vice versa. If a gear does not engage
immediately, release the clutch pedal and then
press it in once again. Engage the gear once again.
Never force a gear in.
3.9 POWER TAKE-OFF (7:Q)
The power take-off must never be
engaged when the front-mounted
implement is in transport position. This
will destroy the belt transmission.
A lever for engaging and disengaging the power
take-off for operating the cutting deck. Two
positions:
1.Forward position – power take-off
disengaged.
2. Backward position – power take-off
engaged.
44
ENGLISH
3.10CLUTCH RELEASE LEVER
(fig. 8) (HD)
A lever for disengaging the variable transmission.
Enables the machine to be moved by hand without
the help of the engine.
The disengagement lever must never be
between the outer and inner positions.
This overheats and damages the
transmission.
Two positions:
The machine may not be towed over long distances
or at high speeds. The transmission could be
damaged.

4 AREAS OF USE

The machine may only be used for the following
tasks using the genuine GGP accessories stated.
Mowing:
With cutting deck;
XM130: 85C.
XM140HD: 85C, 95C.
XM160HD: 85C, 95C, 105C.
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch
from towed accessories must not exceed 500 N.
NOTE! Before using a trailer – contact your
insurance company.
NOTE! This machine is not intended to be driven
on public roads.

5 STARTING AND OPERATION

5.1 ENGINE CASING
See "2.2 ENGINE CASING".
The machine may not be operated
unless the engine casing is folded down.
Risk of burns and crushing injuries.

5.2 FILLING THE FUEL TANK

Open the engine casing as above. Unscrew the
filler cap and fill with clean, lead-free petrol. You
must never use 2-stroke petrol mixed with oil (fig.
9).
1. Lever pressed in –
transmission engaged for normal
operation.
2. Lever pulled out –
transmission disengaged. The
machine can be moved by hand.