Specifications - Omron F160 Vision Sensor Setup Manual

Specifications

5-4

Specifications

F160-C10E/C15E Vision Mate Controller
12
60
9
Four holes,
10.2 dia.
Item
Model F160-C10E
Input/Output type NPN
Supply voltage 20.4 to 26.4 VDC
Current consumption 1.6 A max.
20 M Ω min. between all DC external terminals and GR terminal (100 VDC Megger, with
Insulation resistance
internal surge absorber removed)
Dielectric strength 1,000 VAC, 50/60 Hz between all DC external terminals and GR terminal (with internal
surge absorber removed)
Leakage current 10 mA max.
Noise resistance 2,000 V; pulse width: 50 ns; rise time: 5 ns (pulse)
Burst continuation time: 15 ms; Period: 300 ms
Vibration resistance
10 to 150 Hz; half-amplitude: 0.35 mm; maximum acceleration: 50 m/s
minutes each in 3 directions (except for bottom surface-mounting.)
Shock resistance
150 m/s
Ambient temperature Operating: 0 to 50 ° C (with no condensation)
Storage: -25 to 65 ° C (with no condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Ambient environment No corrosive gases
Class 1 (Ground resistance 100 Ω max.)
Ground
Degree of protection IEC60529 IP20 (in-panel)
Case material ABS/PC
Weight Approx. 570 g (Controller only)
This section provides the specifications and dimensions of the F160 and its
peripheral devices.
Four M3 taps,
Depth 4.8
11
110 1.8
92
Four M4 taps,
Depth 6
2
, 3 times each in 6 directions
56
Four M3 taps,
Depth 4.8
115 min.
Specification
F160-C15E
PNP
Section 5-4
Unit: mm
60 12
2
, 10 times for 8
45