Table of Contents
Advertisement
Chapter 3
Operation
Configuring a Custom Video Stream Configuration
Figure 3-13
Custom Video Stream Configuration Page
Place your mouse pointer over the A/V Streams tab.
Step 1
Step 2
Select Video Configuration from the drop-down menu.
Step 3
Click both of the Clear buttons to delete the primary and secondary streams settings.
Step 4
Optional: In the Primary Stream section, type a user-friendly name in the Name box (2 to 64 characters).
A user-friendly name makes it easier to recognize the stream (for example, Live and Recording).
Step 5
Configure the Compression Standard, Resolution, Image Rate, and Bit Rate settings for the primary
stream.
Note
Repeat steps 3 through 5 for the Secondary stream.
Step 6
Click the Save button to save the settings, or click the Reset button to clear all of the information you
Step 7
entered without saving it.
OL-22669-01
The compression standard, resolution, image rate, and bit rate settings are dependent on each
other. You must first decide the priority setting before you configure a stream. For example, if
you want an image rate of 30 ips, set the image rate before you configure the other settings.
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
A/V Streams Tab
3-27
Advertisement
Table of Contents
