Advance Sharpening; Users And Groups Tab - Cisco 5010 User Manual

Users and Groups Tab

Advance Sharpening

The Advance Sharpening setting enhances picture detail by sharpening the edges in the picture. When
this mode is enabled, there is a trade-off between image quality and the resources required for processing
power. The maximum camera resolution and image rate will not be available, but the edges of the image
seem sharper. Only use this setting if you cannot achieve the sharpness level you want by adjusting the
digital processing settings of the camera. The default setting for Advanced Sharpening is Off.
Users and Groups Tab
Use the Users and Groups tab to create and manage user accounts, group permissions, and to change the
way the camera manages the users and groups settings.
Users
User accounts can be created and added to groups to limit the permissions given to individuals logged
on to the camera. Use the features on the Users page to create, modify, or delete user accounts.
The only defined user that cannot be deleted is admin; however, the administrator password can be
Note
changed. For security purposes, it is important that you change your password after you log on to the
device for the first time.
Figure 3-14 User Page
Groups
Groups can be created to assign permissions to users within each group. Use the features on the Groups
page to create, modify, and delete groups and permissions. Multiple permissions can be assigned to each
group.
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
3-30
Chapter 3 Operation
OL-22669-01