Table of Contents
Advertisement
Chapter 3
Operation
Creating a System Event Source
Place your mouse pointer over the Events tab.
Step 1
Select Sources from the drop-down menu.
Step 2
Click in the Name box and type a user-friendly name (2 to 23 alphanumeric characters).
Step 3
Select System from the Type drop-down menu.
Step 4
Select the Boot check box to activate an event when the camera reboots.
Step 5
Click the Submit button to save the settings, or click the Reset button to clear all of the information you
Step 6
entered without saving it.
Creating a Timer Event Source
Place you mouse over the Events tab.
Step 1
Select Sources from the drop-down menu.
Step 2
Click in the Name box and type a user-friendly name (2 to 23 alphanumeric characters).
Step 3
Select Timer from the Type drop-down menu.
Step 4
Click in the Frequency box and type a number. Select seconds, minutes, hours, or days from the
Step 5
Frequency drop-down menu.
Click the Submit button to save the settings, or click the Reset button to clear all of the information you
Step 6
entered without saving it.
Editing an Event Source
Place your mouse pointer over the Events tab.
Step 1
Select Sources from the drop-down menu.
Step 2
Click the source profile that you want to delete from the defined source box located on the left side of
Step 3
the page.
Make any necessary changes to the available fields.
Step 4
Click the Submit button to save the settings, or click the Reset button to clear all of the information you
Step 5
entered without saving it.
Deleting an Event Source
Place your mouse pointer over the Events tab.
Step 1
Select Sources from the drop-down menu.
Step 2
Click the source profile that you want to delete from the defined source box located on the left side of
Step 3
the page.
OL-22669-01
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
Events Tab
3-37
Advertisement
Table of Contents
