Cisco 5010 User Manual page 18

Surface Installation
Figure 2-6
1 Pan 368°
2
Tab lock
Focus the lens:
Step 7
View the camera image using the service jack or a Web browser.
a.
Press the auto back focus button once to center the focus mechanism. The button is located on the
b.
rim of the back box.
Manually adjust the zoom and focus of the lens to the desired field of view (refer to the instructions
c.
shipped with the lens).
Press and hold the back focus button for three seconds to start the auto back focus mechanism.
d.
Install the dome liner and lower dome (refer to
Step 8
page 2-7).
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
2-6
Positioning the Camera
1
2
3
4
3 Rotate 355°
4
Tilt 160°
"Dome Liner and Lower Dome Installation" section on
Chapter 2 Installation
OL-22669-01