Leg Leveling System; Accessories - Quadra-Fire TOPAZ 839-1290 Installation And Operation Maintenance Owner's Manual

Install vent pipe adapter with gasket or high-temp
Figure 8.6
silicone to rear vent opening.
Place grille gently into the opening on top of the
Figure 8.7
appliance.
Refer to Section 6 (Fuel Conversions) for burner removal and
orifice change/replacement.
C. Leg Leveling System
Thread Allen bolts through nuts until fl ush. The
Figure 8.8
Allen bolts and nuts are included in the component pack inside
the appliance fi rebox.
30
Figure 8.9
the legs with the nuts on the bottom.
Figure 8.10
up and down to desired level.
D. Accessories
Install approved accessories per instructions included with
accessories. Refer to Section 12 for appropriate accesso-
ries.
Quadra-Fire • Topaz • 7009-113 Rev. Q • 6/14
Slide assembled nuts and bolts into the slots on
Use a 5/32 in. 4mm) Allen wrench to adjust legs
WARNING
Shock or fi re risk.
Use ONLY optional accessories approved for
this appliance.
• Using non-listed accessories voids warranty.
• Using non-listed accessories may result in a
safety hazard.
• Only Hearth & Home Technologies approved
accessories may be used safely.