Mineral Wool - Quadra-Fire TOPAZ 839-1290 Installation And Operation Maintenance Owner's Manual

Locater Pins
Insert locator pin into right front log. Insert rear
Figure 8.20
log onto log pan over stud.
Insert locator pin into left front log. Place left front
Figure 8.21
log on burner in the grooved provided on the burner surface.
Insert locator pin into right front log. Place right
Figure 8.22
front log on burner in the grooves provided on the burner
surface.
Place right twig over the locator pins on the rear
Figure 8.23
log and the right front log.
Figure 8.24
and the left front log. To complete your log set application
reinstall the glass and the front of the unit.
H. Mineral Wool
Figure 8.25
around the gas log where they can be seen. Space them so
that gas can contact them on all sides. Avoid stacking the
embers on top of each other.
NOTE: Do not block gas ports.
Quadra-Fire • Topaz • 7009-113 Rev. Q • 6/14
Place left twig over locator pins on the rear log
WARNING
Explosion Risk.
• Follow ember placement instructions in
manual.
• Do NOT place embers directly over
burner ports.
• Replace ember material annually.
Improperly placed embers interferes with proper burner
operation.
Place individual pieces of embers in front of and
33