Oven Control - Asko OP8631S Operating Instructions Manual

Oven control

Before the fi rst use
Important warnings
Switching the appliance
on
• Remove all accessories from the oven and clean them with
warm water and regular detergent. Do not use any abrasive
cleaners.
• When the oven heats up for the fi rst time, the characteristic
smell of "the new" will be emitted. Therefore, ventilate the
room thoroughly during fi rst operation.
• Use dark, black silicon-layered or enamel-coated baking
sheets and trays as they conduct the heat very well.
• Only preheat the oven if required by the recipe of in the tables
in these instructions.
• Heating an empty oven consumes a lot of energy. Hence,
baking several types of pastry or several pizzas successively
will save a lot of energy as the oven will already have been
preheated.
• The oven can be switched off approximately 10 minutes before
the end of the cooking process to save energy as you make
use of the accumulated heat.
After the appliance is connected to the power mains for the fi rst
time, the display will light up. The CLOCK and LANGUAGE
SELECTION menu will appear (see chapter Language Selection
and Setting the Clock). Switch on the appliance by touching the
ON/OFF sensor ( ). The time of day will appear. Touch the
display to open the main menu.
9