Hold; Alarm - Angelcare AC701 Owner's Manual

6.4 - ALARM

Allows you to select your preferred alarm mode for the Parent Unit.
1
2
Sound alarm only
Sound alarm
and vibration
Vibration only:
When the movement alarm is triggered, the Parent Unit will vibrate
and a sound alarm will be heard on the Nursery Unit.
IMPORTANT
When in setting mode no sound or alarms will transmit to the Parent Unit,
except the movement alarm (if this function was already activated).

6.5 - HOLD

Allows you to put your Angelcare Monitor on HOLD.
1
2
IMPORTANT
When your monitor is on HOLD, the movement feature and Movement alarm are disabled.
1) Press the Setting icon to access
3
setting mode.
2) Press the Alarm icon , current alarm
mode
icon will blink. Then press again to select
the alarm mode as the display changes
for various modes.
3) Press the Return icon to confirm your
choice and return to normal screen.
When the Parent Unit is on
the charger, the sound alarm will
replace the vibration mode.
1) Press the Settings icon to access
the setting mode.
2) Press the Hold icon
OR
Press the Nursery Unit Hold button
for 4 seconds.
2
3) Press the Hold icon for 4 seconds or
the Nursery Unit Hold button again
to return to normal operation.
NOTE:
When on HOLD, the Nursery Unit Power Light will
blink. The Parent Unit will emit beeps and/or vibrate
every 20 seconds to remind you that monitor is on
hold, depending on the type of alarm chosen.
E
N
21