Step 11: Hold Function - Angelcare AC1100 Instructions Manual

Step 9c: Video: Night Vision
Step 10: Alarm Type Options
ALARM SETTINGS ICON:
ALARM SETTINGS OPTIONS:
Sound Alarm
Sound & Vibrating Alarm
Vibrating Alarm
PARENT UNIT SETTINGS BAR

Step 11: Hold Function

HOLD FUNCTION ICON:
Hold ON or OFF on Nursery Unit
Hold ON or OFF on Nursery Unit
Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk
Function: During darkness, the video camera automatically switches to Infrared
Night Vision.
How to change During darkness, the video camera on the Nursery Unit will automatically
this setting: switch to Night Vision, using Infrared technology for video transmission.
When activated 4 red LED lights will be visible from the Nursery Unit.
Function: There are 3 different Alarm Type combinations:
• Sound Alarm: An audible alarm will sound if an alarm is activated
• Vibrating Alarm: The Parent Unit will vibrate only if an alarm is
activated, no sound will be heard
• Sound & Vibrating Alarm: Combination of a sound and vibrating
alarm
Factory Settings: Sound & Vibration Alarm
Options: 1. Sound Alarm
2. Vibrating Alarm
3. Sound & Vibrating Alarm
How to change Alarm Settings
this setting: 1. Press the MENU Icon on the Parent Unit touch screen
2. Press the SETTINGS Icon in the MENU screen
3. Press the Alarm Settings Icon until the preferred alarm setting is
selected
4. Press OK twice to save changes and return to the video capture screen
5. The Alarm Setting Icon (see Icons on the left) in the Parent Unit
Settings Bar will show the activated setting
Function: The HOLD Function allows you to put the Baby Monitor on HOLD when
you need to pick up the baby out of his/her bed for a short period of time.
When the Baby Monitor is on HOLD, the Movement Alarm will not go off
and no sound is being transmitted. The Parent Unit will sound a TRIPLE
BEEP every 30 seconds to confi rm the Baby Monitor is still on HOLD.
Factory Settings: OFF
Options: ON or OFF
How to change Hold Function
this setting: 1. Press the MENU Icon on the Parent Unit touch screen
2. Press the HOLD Icon to activate the Hold Function
3. Press the HOLD Icon in the middle of the Parent Unit screen to
deactivate the HOLD Function and to return to the video capture
screen
The HOLD Function can also be activated and deactivated by pressing
the top button on the Nursery Unit.
9