Installing Your Device; Step 1: Attach The Antennas; Step 2: Mount The Router - NetComm NWL-15 Quick Start Manual

Installing your device

Step 1: Attach the antennas

The NetComm Wireless NWL-15 router is shipped with caps on the Main, Auxiliary
and GPS antenna sockets. To attach the antennas, first remove the socket caps
from the Main and Auxiliary antenna sockets then screw the antennas onto the
sockets by turning them in a clockwise direction. Please refer to the Device
overview section for the antenna socket layout. If you have purchased a GPS
antenna, remove the socket cap from the GPS antenna socket and attach the
antenna to the socket in the same manner.

Step 2: Mount the router

Mount your router in a suitable location using the options listed in the Mounting
options section.
When selecting a location to mount the NetComm Wireless NWL-15 router, keep
in mind that it features two high performance antennas designed to provide
optimum signal strength in a wide range of environments. If you find the signal
strength is weak, try moving the router to a different place, mounting it differently or
changing the orientation of the antennas.
The signal strength LEDs update within a few seconds with a rolling average signal
strength reading. When selecting a location for the router, please allow up to 20
seconds for the signal strength LEDs to update before repositioning.
NWL-15 - Light Industrial M2M Router Plus
9