Operating Instruction BDS 33/190 C, BDS 43/150 C, BDP 43/410 C, BDS 43/Duo C English
Before each use
■
Check the unit and -especially the
power cable- for damage
■
Mount the brush wheel attachment or
pad drive disc (accessory) appropriate
to the particular application
Brush wheel attachment- , pad
drive disc assembly
Note:
Inspect the brush wheel attachment
regularly for wear.
■
Empty the cleaning agent tank
(accessory)
■
Pull power plug
■
Place the handle in the vertical position
by pulling the lever (1)
■
Tip unit and rest on handle
18
■
Place the brush wheel attachment or
pad drive disc in the recess provided
and turn anticlockwise
Note:
Dirty pads increase the load on the unit.
Therefore use clean pads. Dirty pads can
be washed at max. 60 °C.
Switching on the unit
Warning!
Operating the unit requires practice!
– The workstation is behind the unit
– Ensure there are no obstacles on the
surface to be cleaned
– Check that the floor is of a suitable
nature
– Handling is more difficult on uneven or
rough floors
Warning!
Danger of electric shock!
– Inspect the power cable for damage
– Never drive over the power cable
– Never sling the power cable around
your body or neck