Features DMX Quick Reference The HighBeam™ Pin-up Picture 3. Setup Fuse Replacement Connecting A Bunch Of HighBeam™ PAR Cans Data/DMX Cables Cable Connectors 3-Pin??? 5-Pin??? Huh? Take It To The Next Level: Setting up DMX Control Fixture Linking (Master/Slave Mode) Mounting/Rigging 4.
• This Lovely User Manual Getting It Out Of The Box The Highbeam, it is sometimes used as a warning when you are speeding down the highway towards a hidden cop. It can cause road rage if you forget to turn it off in traffic.
• Never play with your HighBeam™ in the Bathtub! Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact Blizzard Lighting at sup- port@blizzardlighting.com. Page 4 HighBeam™...
2. MEET THE HIGHBEAM™ LED PAR CONTROL FEATURES • color mixing and 3-zone pixel control via 7 15W OSRAM Red/Green/ Blue/White 4-in-1 LEDs • Variable electronic dimming & strobe • Built-in color & chase macros via DMX • Built-in automated programs via master/slave •...
Figure 1: The HighBeam™ Pin-Up Picture High Power OSRAM 4-in-1 Quad Color LEDs High Tech Space Age Polymer Housing Dual Mounting Yokes & Adjustment/Locking Knobs Figure 2: Behind The Beam LED Display Menu Buttons DMX In DMX Out AC Power In...
The fuse is field replaceable, however it is an advanced procedure suited to qualified individuals. Should your HighBeam™ fuse require replacement, please contact Bliz- zard Lighting for instructions, or to return your unit for service.
4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with the HighBeam™ LED are accessed by using the control panel on the rear of the fixture. There are 4 control buttons below the LED display which allow you to navigate through the various control panel menus.
Keeping Your HighBeam™ As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equip- ment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed.
Page 19
DISCLAIMER: The power connector fitted to the fixture and fixture cord are designed for compatibility with products manufactured by Neutrik AG, Neutrik USA and their related entities, howev- er they are not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity.
Page 20
Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...