Table of Contents
Advertisement
Chapter 6: Advanced Chassis Setup
6-6
System Cooling
Five 8-cm fans provide the cooling for the system. It is very important that the chas-
sis top cover is properly installed and making a good seal in order for the cooling
air to circulate properly through the chassis and cool the components.
System Fan Failure
Fan speed is controlled by system temperature by means of an IPMI setting. If a
fan fails, the remaining fans will ramp up to full speed. The system can continue to
run with a failed fan. Replace any failed fan at your earliest convenience with the
same type and model.
6-11
Advertisement
Table of Contents
