Monaco 2002 Diplomat Service Manual page 150

Equipment
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
5 • 1 5 0
2. Press the Select button to call any of the audio functions on the dis-
play. Within 2 seconds of pressing the Select button, and while the
audio function is still on the display panel, press the pre-set button (1
through 3) to be set and continue to hold it in. After approximately
2 seconds, the pre-set number ("P-1", "P-2", or "P-3) will appear on
the display panel indicating that the audio levels are now set into
that memory position. The settings can be recalled at any time by
pressing the Select button and then that pre-set button within 2 sec-
onds.
• AUDIO MUTE (MUTE) - This button is used to mute the volume
from the system. By pressing the button, the indication "MUTE"
will appear on the display panel and the volume will be muted.
Pressing the Mute button again will return the volume level to the
setting in use before the Mute function was activated.
• AM/FM BAND SELECTOR (BAND) - During radio operation,
each momentary press of this button will change the radio band.
The indication "AM1", "AM2", "FM2", or "FM3" will appear on
the display panel according to your selection.
• MANUAL UP/DOWN TUNING & AUTOMATIC SEEK TUN-
ING (TUN) - Each time the right arrow button is tapped, the radio
will tune one frequency step higher. Similarly, each tap of the left
arrow button will tune one frequency step lower. To manually tune
in a station, tap the button of the appropriate direction until the
desired frequency is reached.
Pressing either button for longer than 0.5 seconds and then releasing
will activate the Automatic Seek Tuning function. The radio will
seek the next available station and stop at the frequency. The Seek
function can be stopped by pressing the button again or activating
any other tuning function.
• AUTO-STORE TUNING (AS) & PRE-SET SCAN TUNING (PS)
- During radio operation, press this button momentarily to scan the 6
stations pre-set into the memories of that band. The unit will stop at
each pre-set station for 5 seconds before continuing to the next pre-
set station. Press the button again momentarily to stop Pre-Set Scan
operation and remain on the selected frequency. Pressing the button
for longer than 2 seconds will activate the Auto-Store Tuning feature
which will automatically scan the band and enter up to 6 strong sta-
tions into the 6 pre-set memories.
• STATION PRE-SET MEMORIES - To set any of the 6 pre-set
memories in each band, use the following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down or
Automatic Seek Tuning controls.
D I P L O M A T