Remote Control Operation - moon 650D Evolution Series Owner's Manual

Remote Control Operation

Figure 3: FRM-3
Remote Control
12
650D Evolution
The MOON 650D uses the 'FRM-3' full function, all aluminum backlit remote control
(figure 3). It operates on the Philips RC-5 communication protocol and is can be used
with other MOON components such as CD Players, DAC's, Integrated Amplifiers, as well
as other Preamplifiers.
The 'FRM-3' remote uses three AAA batteries (included). To install them, use a Phillips
head screwdriver #1 to remove the three screws located on the rear plate; insert the
batteries in the correct direction and then screw the rear plate back into place.
To operate the 650D with this remote control, you must first press the CD button
located on the second row from the top.
The power button switches the 650D between 'Standby' and 'On' mode.
0 thru 9
The Input and Input
backward, through each of the 650D's four (4) digital inputs - "D1", "D2", "D3" and "D4"
- and the internal CD transport (as opposed to the 'Input' button located on the
650D's front panel which only allows for forward scrolling).
The "Time", "Disp" "Rnd", "Rpt" and "Prog" buttons perform the identical functions
to their corresponding button located on the 650D's front panel. Please refer to pages
7 and 8 for a more detailed description of each one..
Series
Pause the compact disc loaded into the transport
Play the compact disc loaded into the transport
Stop playing the compact disc loaded into the transport
Press Once: Go back to the previous track on the disc
Press and hold: Scan backward through current track
Press Once: Skip forward to the next track on the disc
Press and hold: Scan forward through current track
Direct access track number selection: Simply press the
number button(s) corresponding to the track you want
to play. This can be done either when another track is
already playing or when the disc is stopped.
buttons allow you to sequentially scroll, forward or