Table of Contents
Advertisement
Owner's Manual
Unpacking
The MOON 650D should be removed from its box with care.
The following accessories should be included inside the box with your DAC/CD Transport:
AC power cable
FRM-3' remote control with three 'AAA' batteries
SimLink™ cable with 1/8" mini plug terminations on each end
This owner's manual
Warranty and product registration information
Once the 650D is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest
that you keep all of the original packaging, storing it in a safe, dry place in case you're required to transport this
product. The customized packaging is specially designed to protect the 650D from any potential damage during
transit.
Please write the serial number of your new MOON 650D in the space provided below for future reference.
Installation
The MOON 650D DAC / CD Transport should be placed
on a solid, level surface. You should avoid placing it near
a heat source or inside a closed cabinet that is not well
ventilated as this could compromise the preamplifier's
performance and reliability.
If the surface you have chosen isn't perfectly level, each
of the four (4) legs of your 650D are height adjustable;
carefully using your fingers, you can either raise each
leg by turning the cone underneath clockwise, or lower
each leg by turning it counterclockwise.
Serial Number
(USA and Canada only)
We strongly recommend that you leave these cones
mounted to the component at all times for reasons
related to both performance and aesthetics.
If you intend to use the Nēo 650D's USB input
connection with a Windows-based computer, you will
need to install our USB HD driver, which can be
downloaded from the support section of our website..
Note:
Apple-based computers don't require this
driver.
7
Advertisement
Table of Contents
