Owner’s Manual Important Safety Instructions Read these instructions. receptacles, and the point where they exit from the apparatus. Unplug mains cord during Keep these instructions. transportation. Heed all warnings. 11. Only use attachments and accessories specified by Follow all instructions. the manufacturer.
Page 4
MOON 650D, immediately disconnect it from component. To completely disconnect this the AC mains and take it to your MOON dealer apparatus from the AC mains, disconnect the for a complete check-up. power supply cord plug from the AC receptacle.
We hope you enjoy Four (4) digital inputs (AES/EBU, S/PDIF, TosLink and USB) listening to the MOON 650D DAC / CD Transport as allowing for a connection to virtually any digital source. much as the pride we have taken in creating this fine audio product.
The customized packaging is specially designed to protect the 650D from any potential damage during transit. Please write the serial number of your new MOON 650D in the space provided below for future reference. Serial Number Installation...
Series Front Panel Controls Figure 1: MOON 650D Front panel The front panel will look similar to Figure 1 (above). The large digital display window indicates the track number of the compact disc currently playing (or the total number of tracks in stop mode) and corresponding time information.
Page 9
“----” remains in the display playing time will appear in the display window. As a window. The MOON 650D is capable of processing an result of various copy protection schemes, some CDs external digital input signal at one of the following six will take longer to read than others.
“Right” and “Left”, each with a single-ended RCA and balanced XLR connector. Don’t hesitate to use good quality interconnect cable when making the connection between the MOON 650D and your preamplifier or integrated amplifier. We strongly recommend that you use the balanced XLR connectors on your 650D to maximize its level of performance.
When you are using your MOON 650D with an older MOON product such as a P-7, P-8 or i-7, you will need to update the software of the older product to allow for complete SimLink™ functionality. Contact your retailer...
Series Remote Control Operation The MOON 650D uses the ‘FRM-3’ full function, all aluminum backlit remote control (figure 3). It operates on the Philips RC-5 communication protocol and is can be used with other MOON components such as CD Players, DAC’s, Integrated Amplifiers, as well as other Preamplifiers.
Page 13
Remote operation with multiple MOON components Figure 4: Remote Operation with SimLink™ In figure 4 we have a 180 MiND Music Streamer connected to a 650D DAC via their respective SimLink™ ports (using a 1/8”...
MOON 650D, any noise picked up by the preamplifier and amplifier, then heard through the interconnect will be eliminated since a differential loudspeakers.
Owner’s Manual Specifications Configuration Fully balanced Transport Mechanism Proprietary Design Digital Filter / Digital-to-Analog Converters ESS ES9016 Sabre 32-bit Hyperstream™ Frequency Response (audible) 20Hz - 20kHz +0/-0.1dB (internal CD transport) Frequency Response (full range) 2Hz - 100kHz +0/-3dB (external digital source) THD @1kHz, 0dBFS (A-weighted) 0.001% Intermodulation Distortion...
Page 16
650D Evolution Series Balanced Input Pin Assignment: Pin 1 Ground Pin 2 Positive Pin 3 Negative NOTE: If you require the RS-232 codes for your 650D, please visit the "Contact Us" page and complete the "Information request" form on our website at www.simaudio.com. Fuse Replacement: For the 120V version use a 0.2A slow blow (5 x 20mm size).