Table of Contents
Advertisement
Remote Control Operation
Figure 3: CRM-2 Remote Control
For Nēo 260D units equipped with the optional 32-bit
DAC, you can sequentially scroll, either backwards or
forwards, through all four (4) available inputs using the
2 buttons labelled ◄ INPUT ►. For example, to switch
12
260D Nēo
Series
The Nēo 260D CD Transport uses the 'CRM-2' full-function remote control
(figure 3). It operates on the Philips RC-5 communication protocol and is can
be used with other MOON components.
The 'CRM-2' remote uses two AA batteries (included). To install them, simply
slide the back plate off in the direction of the arrow; insert the batteries in the
correct direction and then replace the back plate.
To engage the 'CRM-2' remote for use with the 260D CD Player, you must
first press the button labeled CD.
The POWER button located on the upper left will switch the CD Player to
either 'Stand by' or 'On' mode.
Certain buttons found on this remote control perform identical functions to
their corresponding button located on the 260D's front panel. Please refer to
page 8 for a more detailed description of the "RANDOM", "REPEAT", "PROG"
and "TIME" buttons.
0 thru 9
OPEN/CLOSE
DISPLAY
TIME
◄ INPUT ►
Direct access track number selection
Open/Close the Compact Disc drawer
Turns the front panel display on and off
Changes the time display mode on front panel
(refer to TIME button on page 8 for more details)
To switch from listening to the disc loaded in the player
to an external digital source connected to the player
Stop playing the CD's current track
Pauses the player
Play the compact disc loaded into the player
Press Once: Go back to the previous track on the disc
Press and hold: Scan backward through current track
Press Once: Skip to the next track on the disc
Press and hold: Scan forward through current track
from "D4" to "D1" you may press either ◄ INPUT three
(3) times or INPUT ► one (1) time. Pressing and holding
down either of these buttons results in only a single
change to the selected input.
Advertisement
Table of Contents
