WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. FCC information for MOON 380D Digital-to-Analog Converters equipped with the MiND Music Streamer module: This unit contains Transmitter Module FCC ID : ZUCSEDMP3.
Page 3
To prevent shock hazard, all three connections must ALWAYS be used. Connect the MOON 380D only to an AC source of the proper voltage; Both the shipping box and rear panel serial number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void the warranty AC extension cords are NOT recommended for use with this product.
Before setting up your new 380D, we encourage you to please read this manual thoroughly to properly acquaint yourself with its features. We hope you enjoy listening to the Nēo 380D DAC as much as the pride we have taken in creating this fine audio product.
In the event that your Nēo 380D is equipped with the “MiND” Music Streamer option and you intend to use its wireless streaming feature (between your wireless router and your 380D), you must install the included Wi-Fi antenna on the back panel by screwing it into the socket labelled “WIFI ANT”.
When you change inputs, the display window will show the new digital input and briefly four (4) dashes “----”. These dashes indicate that the Nēo 380D is in the process of locking onto a digital signal – this may take several seconds. Once the 380D successfully locks onto the digital signal, the four dashes will be replaced by the sampling rate frequency of this digital signal.
AC wall outlet you use has a functioning ground. For the best sonic performance, it is preferable that you plug your 380D directly into a dedicated AC outlet and avoid using an extension cord. If you have the time and willingness, consider installing a superior quality AC wall outlet such as a hospital grade Hubbell*.
SimLink™ chain; no one particular component operates as the main communications controller. If you are using your Nēo 380D with an older MOON product such as a P-7, P-8 or i-7, you will need to update the software of the older product to allow for complete SimLink™...
Figure 4: Remote Operation with SimLink™ In figure 4 we have a 180 “MiND” Music Streamer connected to a Nēo 380D DAC via their respective SimLink™ ports (using a 1/8” mini-jack cable), and the 380D connected to a 340i Integrated Amplifier also via their respective SimLink™ ports. When you launch the MiND App on your smart device (iPad, iPhone, Android Device) and select this system’s ZONE, the 180 “MiND”,...
Page 11
To engage the ‘CRM-2’ remote for use with the Nēo 380D, you must first press the button labeled D/A.
Signal Input – Wired ..........IEEE 802.11 b/g/n Wi-Fi interface Signal Input – Wireless ..........NOTE: If you require the RS-232 codes for your Nēo 380D, please contact Simaudio Ltd. directly by either email (service@simaudio.com) or by toll-free telephone (877-980-2400). Fuse Replacement: For the 120V version use a 0.2A slow blow (5 x 20mm size).
Need help?
Do you have a question about the 380D and is the answer not in the manual?
Questions and answers