Table of Contents
Advertisement
Remote Control Operation
Figure 3: FRM-3
Remote Control
16
780D Evolution
The MOON 780D uses the 'FRM-3' full function, all aluminum backlit remote control (figure 3). It
operates on the Philips RC-5 communication protocol and can be used with other MOON
components such as CD Players, DAC's, Integrated Amplifiers, as well as other Preamplifiers. The
'FRM-3' remote uses three AAA batteries (included). To install them, use a Phillips head
screwdriver #1 to remove the three screws located on the rear plate; insert the batteries in the
correct direction and then screw the rear plate back into place.
To operate the 780D with the'FRM-3', you must press the DAC button on the second row.
The
power button switches the 780D between 'Standby' and 'On' mode.
Time
Disp
Rnd
Rpt
Mute
The Input
and Input
buttons located on the 780D's front panel.
* Denotes remote functions available ONLY for the D8 MiND input.
Series
* Alternates the display window contents between currently
playing track's elapsed time and the OSD settings defined in
the Software Setup. Note: The D8 MiND input must have its
STATUS set to "STATUS Y" for this to function to work (pg. 10).
Adjusts the display window's brightness by scrolling through the 3
different brightness levels: Low, Medium (Default) and High. To
turn off the display, press and hold for 2 seconds - repeat to turn
the display back on.
* Plays the tracks in the MiND QUEUE in a random order instead of
the order as they appear in the QUEUE. The display will show"RND
ON" when activated and "RND OFF" when deactivated.
* Press once and the entire MiND QUEUE will play again once it has
reached the end; The display will show "RPT ALL". Press a second
time and the current track in the QUEUE will play again once it has
ended; The display will show "RPT 1". Press a third time to cancel
the repeat mode; The display will show "RPT OFF".
Mutes the analog output signal. The display will show "MUTE".
Pressing "Mute" again will reinstate the analog output signals.
* Pause the track currently playing in the MiND QUEUE.
* From the paused position, resumes playback of the paused track
in the MiND QUEUE or from the stopped position begins playback
from the beginning of the MiND QUEUE.
* Stop the track currently playing in the MiND QUEUE and resets
position to the beginning of the QUEUE.
* Go back to previous track in the MiND QUEUE.
* Skip forward to next track in the MiND QUEUE.
buttons performing the same function as the Input
and Input
Advertisement
Table of Contents
