Notices and Certifications
Radio frequency emissions
FCC in the USA
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his/her own expense.
Changes or modifications to this equipment not specifically approved by the Xerox
Corporation may void the user s authority to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance with FCC
In Canada (ICES-003)
This Class "A" digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe "A" est conforme à la norme NMB-003 du Canada.
Safety extra low voltage approval
This Xerox product is in compliance with various governmental agencies and national
safety regulations. All system ports meet the Safety Extra Low Voltage (SELV) circuits
for connection to customer-owned devices and networks. Additions of customer-owned
or third-party accessories that are attached to the machine must meet or exceed the
requirements previously listed. All modules that require external connection must be
installed per the installation procedure.
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed below.
Underwriters Laboratories Inc.
(US / Canada)
UL60950-1 (2007) 2nd Edition
CSA 22.2 No. 60950-1-07 2nd Edition