Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when used
on electromechanical equipment.
Use supplies and cleaning materials only as directed in the Operator section of this
Do not remove the covers or guards that are fastened with screws. There are no parts
behind these covers that you can maintain or service.
Your Xerox machine is equipped with an energy saving device to conserve power when
the machine is not in use. The machine may be left on continuously.
The metallic surfaces in the fuser area are hot. Please use caution when removing paper
jams from this area and avoid touching any metallic surfaces.
Store all consumables in accordance with the instructions given on the package or
Keep all consumables away from the reach of children.
Never throw toner, print cartridges, or toner containers into an open flame.
When handling cartridges such as ink or fuser, avoid skin or eye contact. Eye contact
can cause irritation and inflammation. Do not attempt to disassemble the cartridge.
This can increase the risk of skin or eye contact.
Vacuum Cleaners: Toner spill, clean-up
Use a broom or a wet cloth to wipe off spilled toner. Sweep slowly to minimize generation
of dust during clean up. Avoid using a vacuum. If a vacuum must be used, the unit should
be designed for combustible dusts (for example, explosion rated motor and