Notices; Radio Frequency Emissions; Fcc In The Usa; In Canada (Ices-003) - Xerox DocuColor 7002 Safety Manual

DocuColor 7002/8002

Notices

Notices

Radio frequency emissions

FCC in the USA

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his/her own expense.
Changes or modifications to this equipment not specifically approved by the Xerox Corporation
may void the user's authority to operate this equipment.
WARNING
Shielded cables must be used with this equipment to maintain compliance with FCC regulations.

In Canada (ICES-003)

This Class "A" digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe "A" est conforme á la norme NMB-003 du Canada.

Regulatory information for RFID

This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency
IDentification system device (RFID). This system is certified in compliance with European
Council Directive 99/5/EC and applicable local laws or regulations as applicable.

Safety extra low voltage approval

This Xerox product is in compliance with various governmental agencies and national safety
regulations. All system ports meet the Safety Extra Low Voltage (SELV) circuits for connection to
customer-owned devices and networks. Additions of customer-owned or third-party accessories
that are attached to the press must meet or exceed the requirements previously listed. All
modules that require external connection must be installed per the installation procedure.
Safety Guide 5