Service Schedule; Maintenance And Service - Husqvarna DXR300 Operator's Manual

Service schedule

The service schedule is based on the machine's operating time. More frequent service intervals might be necessary when working
in dusty or hot environments and in conjunction with work that generates high temperatures. A description of how the operations
are to be performed is to be found in the service review.
Daily maintenance
Daily maintenance must also be carried out after transportation.
Lubrication
Cylinders and shafts in arm system and tool attachment
Tools
Cracks
Cylinders and shafts in lower part and outriggers
Cylinders and shafts in arm system and tool attachment
Tools
Mountings
Cylinders and shafts in lower part and outriggers
Cylinders and shafts in arm system and tool attachment
Tools
Level check
Hydraulic fluid
Hammer lubrication
Wear and damage
Cylinders and shafts in arm system and tool attachment
Visible hoses (arm system, outriggers etc)
Power cable, connectors and sockets
Rubber components - outrigger foot, drive belt
Leakage
Cylinders in undercarriage and outriggers
Cylinders in arm system and tool holder
Visible hoses (arm system, outriggers etc)
Tools
Function
Cylinders and shafts in lower part and outriggers
Cylinders and shafts in arm system and tool attachment
Power cable, connectors and sockets
Tools
38 –
English

MAINTENANCE AND SERVICE