Husqvarna DXR300 Operator's Manual page 49

Communication error
Message on the display
No secondary control module found in
machine. Please check control modules
and CAN connection in machine.
Machine type not selected. Enter
machine type menu and selectmachine
type for the current machine
Selected machine type not supported by
terminal. This may affect machine type
specific functions
Communication error. Machine type could
not be uploaded to terminal. Please
restart terminal.
Communication error. List of available
machine types could not be uploaded to
terminal. Please try again
Communication error. Machine type may
not have been selected correctly in
machine. Machine type disabled in
terminal. Please make selection again.
Communication error. No new machine
type has been downloaded to machine.
Please make machine type selection
again.
Communication error. Parameter could
not be updated from machine. Please try
again.
Communication error. Parameter may not
have been correctly downloaded to
machine. Please try changing parameter
again.
Communication error. Warning
information could not be uploaded from
machine.
Communication error. Conflicting warning
information. Please restart machine.
Communication error. Terminal incapable
of uploading warning information. Please
restart terminal and machine.
TROUBLESHOOTING
Indication on the Effect on machine
machine functions
No indication on
machine.
No indication on
machine.
Cause Possible action
Restart the
The PLC module do
machine. Check
not find any slave
supply and CAN
module to
cables to the slave
communicate with.
module.
Communication
Restart the
problem between
machine and the
master module and
terminal.
terminal.
– 49
English