Ec Declaration Of Conformity - Husqvarna DXR300 Operator's Manual

EC DECLARATION OF CONFORMITY

EC Declaration of Conformity
(Applies to Europe only)
Husqvarna AB, S-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the demolition robot
Husqvarna DXR300 dating from 2013 serial numbers and onward (the year is clearly stated on the type plate, followed by the
serial number), complies with the requirements of the COUNCIL'S DIRECTIVE:
• Of March 9, 1999 relating to "Radio Equipment and Telecommunications Terminal Equipment" 1999/5/EG.
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
• of December 12, 2006 "relating to electrical equipment" 2006/95/EC.
• of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
• of June 08, 2011 on the 'restriction of use of certain hazardous substances' 2011/65/EU
For information relating to noise emissions, see the Technical data chapter.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, has issued reports regarding the
assessment of conformity according to annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise emissions in
the environment" 2000/14/EC.
The certificate has the number: 01/000/002.
The following standards have been applied:
EN ISO 12100-2, EN 61000-6-2:2005, EN 61000-6-4:2007,ETSI EN 301 489-17 V2.1.2:2009, ETSI EN 301 489-1 V1.8.1:2008
Gothenburg 31 July 2013.
Helena Grubb
Vice President, Construction Equipment
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
– 57
English