Track widener
The machine is equipped with track wideners for increased
stability when working with the machine.
•
Width with track widener: 1110 mm (44 in)
•
Width without track widener: 780 mm (31 in)
Assembly
•
Extend the outriggers.
•
Shut off the machine. Disconnect the power cable and
place it so that it cannot be connected by mistake.
•
Loosen screws A and B.
•
Slide washer C to one side.
•
Pull the side of the tracks out a sufficient distance to
enable the track widener to be fitted.
•
The holes of the track widener must be facing the
machine.
•
Move the side of the track towards the machine.
•
Tighten the screws. M24 (500Nm), M10 (47Nm)
To dismantle, follow the instructions in the reverse order.
30 –
English
SETTINGS