Figure 6-8 First Set In Menu 15.1.1; Table 6-5 Menu - ZyXEL Communications ZyWALL 10 User Manual

ZyWALL 10 Internet Security Gateway
Set Name= NAT_SET
Idx Local Start IP
--- ---------------
1.
2
3.
4.
5.
6.
7.
8.
9.
10.
The Type, Local and Global Start/End IPs are configured in Menu 15.1.1.1 (described
Ordering Your Rules
Ordering your rules is important because the ZyWALL 10 applies the rules in the order that you specify.
When a rule matches the current packet, the ZyWALL 10 takes the corresponding action and the remaining
rules are ignored. If there are any empty rules before your new configured rule, your configured rule will be
pushed up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your
current set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not
9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6
becomes rule 5 and old rule 7 becomes rule 6.
The description of the other fields is as described above. The Type, Local and Global Start/End IPs are
configured in Menu 15.1.1.1 (described later) and the values are displayed here.
Field
Set Name
Action
6-10
Menu 15.1.1 - Address Mapping Rules
Local End IP
---------------
Action= Edit
Press ENTER to Confirm or ESC to Cancel:

Figure 6-8 First Set in Menu 15.1.1

later) and the values are displayed here.

Table 6-5 Menu 15.1.1

Description
Enter a name for this set of rules. This is a required
field. Please note that if this field is left blank, the
entire set will be deleted.
There are 4 actions. The default is Edit. Edit means
you want to edit a selected rule (see following field).
Insert Before means to insert a rule before the rule
Global Start IP Global End IP
--------------- ---------------
Select Rule=
Type
------
Option
Edit
Insert Before
Delete and
NAT