ZyXEL Communications ZyWALL 10 User Manual page 61

ZyWALL 10 Internet Security Gateway
Field
Rem Node Name
Active
Encapsulation
Service Type
Service Name
Outgoing: My
Login
Outgoing: My
Password
Server IP
Route
Edit IP
Session Options:
Edit Filter sets
4-2
Table 4-1 Fields in Menu 11.1
Enter a descriptive name for the remote node. This field can
be up to eight characters.
Press the [SPACE BAR] to toggle between Yes and No and
activate (deactivate) the remote node.
Ethernet is the default encapsulation. Press the [SPACE
BAR] if you wish to change to PPPoE encapsulation.
Press the [SPACE BAR] to select from Standard, RR-
Toshiba (RoadRunner Toshiba authentication method) or
RR-Manager (RoadRunner Manager authentication
method). Choose one of the RoadRunner methods if your
ISP is Time Warner's RoadRunner; otherwise choose
Standard.
This is valid only when you have chosen PPPoE
encapsulation. If you are using PPPoE encapsulation, then
type the name of your PPPoE service here.
This field is applicable for PPPoE encapsulation only. Enter
the login name assigned by your ISP when the ZyWALL
calls this remote node. Some ISPs append this field to the
Service Name field above (e.g.,
PPPoE server.
Enter the password assigned by your ISP when the ZyWALL
calls this remote node. Valid for PPPoE encapsulation only.
This field is valid for RoadRunner service type only. The
ZyWALL will find the RoadRunner Server IP automatically if
this field is left blank. If it does not, then you must enter the
authentication server IP address here.
This field refers to the protocol that will be routed by your
ZyWALL – IP only for the ZyWALL 10.
This field leads to a "hidden" menu. Press the [SPACE BAR]
to select Yes and press [ENTER] to go to Menu 11.3 -
Remote Node Network Layer Options.
This field leads to another "hidden" menu Use the [SPACE
BAR] to toggle this field to Yes and press [ENTER] to open
Menu 11.5 to edit the filter sets. See the Remote Node Filter
section for more details.
Description
jim@poellc
) to access the
Examples
LAoffice
Yes
Ethernet
Standard
poellc
jim
*****
IP
Yes
Yes
Remote Node Setup