This chapter explains SNMP Configuration menu 22.
25.1 SNMP Introduction
See
Section 12.6 on page 131
25.2 SNMP Configuration
To configure SNMP, select option 22 from the main menu to open Menu 22 — SNMP
Configuration as shown next. The "community" for Get, Set and Trap fields is SNMP
terminology for password.
Figure 148 Menu 22 SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 84 Menu 22 SNMP Configuration
FIELD
SNMP:
Get Community
Set Community
Trusted Host
Chapter 25 SNMP Configuration
SNMP Configuration
for background information on SNMP.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Type the Get Community, which is the password for the incoming Get- and
GetNext requests from the management station.
Type the Set community, which is the password for incoming Set requests from
the management station.
If you enter a trusted host, your Prestige will only respond to SNMP messages
from this address. A blank (default) field means your Prestige will respond to all
SNMP messages it receives, regardless of source.
Prestige 2302R Series User's Guide
C
H A P T E R
2 5
235