External Display - Panasonic CF-M34 Reference Manual

External Display

Port Replicator
External Display Port
1
Power off your computer
Do not shut down using the standby or hibernation function.
2
Connect your computer to the optional port replicator
( The operation manual of the port replicator,
3
Connect the external display to the port replicator
NOTE
For more detailed information, refer to the operation manual of the external
display.
4
Turn on the external display, then turn on your computer
You can select either an external display, LCD or simultaneous with
+ F3 .
In addition, you can set the display to use during start-up with the follow-
ing procedure.
1
Run the Setup Utility
2
Using either
3
Using either
4
Using either
Enter
5
Press F10 , then select [Yes]
Windows 98
6
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control Panel]
- [Display] - [Settings] - [Advanced].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change]* and make the monitor settings.
* Windows 2000
( "Starting Up/Shutting Down")
( page 51)
or , select [Main]
or , select [Display] and press Enter
or , select the display to use and press
Windows 2000
: [Monitor] - [Properties] - [Driver] - [Update Driver]
37
page 47)
Fn