Hard Disk Drive
To change your hard disk drive, contact Panasonic Technical Support
CAUTION
To customers:
To change your hard disk drive, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
To technicians (at Panasonic Technical Support):
Be careful when replacing the hard disk drive. The hard disk drive is extremely
sensitive to shock. In addition, static electricity could later affect some internal
components.
Do not put pressure on the top surface of the hard disk drive. When handling the
drive, hold the drive from the side.
Installing/Removing the hard disk drive
(For technicians at Panasonic Technical Support)
1
Power off your computer
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor.
2
Remove the battery pack
3
Remove the cover
Remove the ten screws with a screwdriver, and remove the bottom
cover as shown in the illustration.
2
Lift the panel to which the speaker is attached, as shown in the
illustration, and flip it over.
2
Speaker
(
"Starting Up/Shutting Down")
(
page
33)
(To next page)
49