Using An External Display - Panasonic CF-45 Series Reference Manual

Using an External Display

Ext. Display Port
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
CAUTION
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
2
Connect the external display to your computer
NOTE
For more detailed information, please refer to the operation manual of the external
display.
3
Turn on the display, then turn on your computer with the LCD
panel opened
You can choose to select either an external display, or the LCD, or both with Fn +
F3 .
In addition, you can set the display to use during start-up with the following procedure.
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
press
Enter
5
Press , then select [Yes]
F10
4
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control Panel] -
[Display] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play standards is connected, select
[Change] and make the monitor settings.
( )
( page 26)
, select [Main]
, select [Display] and press
, select the display to use and
21
Enter