External Display - Panasonic CF-48 Series Reference Manual

External Display

External Display Port
1
Power off your computer
Do not shut down using the standby or hibernation function.
2
Connect the external display to your computer
NOTE
For more detailed information, refer to the operation manual of the
external display.
3
Turn on the external display, then turn on your computer
NOTE
When an external display is connected, the computer displays on
both the internal LCD and the external display after Windows starts
up regardless of the [Display] setting in the Setup Utility.
It is possible to change the setting to display only on the external
display or only on the internal LCD with the Fn + F3
Windows 98 Windows 2000
4
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change]* and make the monitor settings.
* Windows 2000 : [Monitor] - [Properties] - [Driver] - [Update Driver]
NOTE
For more detailed information, refer to the operation manual of the
external display.
The characters on the external display may be blurred if the resolution
of the external display is set to 2048 x 1536. In this case, select a
resolution that is lower than 2048 x 1536.
( "Starting Up/Shutting Down")
35
keys.