Panasonic CF-M34 Reference Manual page 63

Dealing with Problems
Starting Up
Windows NT
NT does not start up
Shutting Down
Unable to shut down Win-
dows
Battery Indicator
The red indicator lights.
Repeated beeping sound
while the computer is in
use.
The red indicator blinks
The orange indicator
blinks
T h e g r e e n i n d i c a t o r
blinks
Touch Pad
Unable to input using the
touch pad
Windows NT
The movement of the
touch pad may some-
times stop
Touchscreen
Unable to input by
touching the display
Try the steps listed below.
1 Power off the computer, and then power it on again.
2 When [Press spacebar NOW to ...] is displayed, press the space key.
3 When [Hardware Profile/Configuration Recover Menu] is displayed, follow the on-
screen instructions.
If a USB device is connected, try removing it.
The battery level is low. Save your data and power off your computer.
After connecting the AC adaptor or replacing the battery pack with a fully charged
one, turn your computer on.
The battery pack or recharging function may be defective. Quickly remove the
battery pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support.
Unable to charge because of an improper temperature range. (
tions")
Battery pack is discharging to 65% or below in high temperature mode.
Has the Setup Utility been used to set [Touch Pad] to [Enable]? (
When mouse drivers are installed (e.g., Intellimouse), the touch pad is unable to
be used.
Has the touchpad driver been properly installed?
If the LAN is enabled, the movement of the touch pad may sometimes stop when
resuming from the standby or hibernation mode. In such cases, restart the computer.
Has the Setup Utility been used to set [Touch Screen] to [2E8/IRQ7]?
( page 53)
Confirm that the setting for resource in [Start] - [Programs] - [Updd] - [Settings] -
[Hardware] and the setting for [2E8/IRQ7] in [Touchscreen] of the Setup Utility are
appropriate.
When mouse drivers are installed (i.e. Intellimouse), the touchscreen may at times
be unable to be used. In such cases, reinstall the touchscreen driver.
(Advanced)
63
"Precau-
page 52)