Technical Information - Panasonic CF-M34 Reference Manual

Technical Information

Network
Windows Security Function
When the power saving function is running, communications software may malfunc-
tion. For example, communications may be halted if the standby (hibernation) mode
is activated. The computer must be restarted if one of these modes is entered during
data communications.
Be sure that the power of the display is cut (for energy conservation purposes) or the
computer enters standby (hibernation) mode after the communications software is
closed.
The network connection may be severed under the condition the
Windows 98
power of the display is off (for energy conservation purposes) and
standby (hibernation) mode. When network or communication soft-
ware is to be used, set [System standby], [T urn off monitor] and [Turn
off hard disks] (in [Star t] - [Settings] - [Control Panel] - [Power Man-
agement]) to [Never].
Windows 2000
The network connection may be severed under the condition the
power of the display is off (for energy conservation purposes) and
standby (hibernation) mode. When network or communication soft-
ware is to be used, set [System standby] and [System hibernates],
[Turn off monitor] and [Turn off hard disks] (in [Start] - [Settings] -
[Control Panel] - [Power Options]) to [Never].
Windows NT The network connection may be severed when entering the ECO
mode and standby (hiber nation) mode. Be sure to disable the
[Standby/Hibernation Timeout]* settings with the Setup Utility if you
require a network environment. The computer will not operate prop-
erly. If this occurs, restart the computer.
*
Since access to the hard disk occurs often on Windows NT, standby/hibernation
timeout may not function according to the set times. However, be sure to set OFF just
to be safe.
Windows 2000
Windows 2000 or Windows NT has a security function that differs from the security
function of the Setup Utility. For detailed information, refer to the Windows help.
NOTE
Set the password for secrecy and protection.
Only an account for the Administrator is created the first time the computer is
started. Create accounts for person or persons who are actually going to use a
computer.
We recommend using an NTFS file system in order to use the Windows security
function.
Windows NT
57