External Display - Panasonic Toughbook CF-07 Series Reference Manual

External Display

Port Replicator
External Display Port
<Only when the port replicator is connected>
1
Power off your computer
Do not shut down using the standby or hibernation mode.
2
Connect your computer to the optional port replicator
( Operating Instructions of the port replicator,
3
Connect the external display to the port replicator
NOTE
For more detailed information, refer to the operation manual of the
external display.
4
Turn on the external display, then turn on your computer
5
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change]* and make the monitor settings.
Windows 2000
* : [Monitor] - [Properties] - [Driver] - [Update Driver].
NOTE
For more detailed information, refer to the operation manual of the
external display.
The external display will show the same screen size as the wireless
display when the latter is connected. Both displays will therefore ap-
pear identical.
( "Starting Up/Shutting Down")
page
25
23)