External Display - Panasonic Toughbook CF-M34 Series Reference Manual

External Display

Port Replicator
External Display Port
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
2
Connect your computer to the optional port replicator
( The operation manual of the port replicator,
3
Connect the external display to the port replicator
NOTE
For more detailed information, refer to the operation manual of the external
display.
4
Turn on the external display, then turn on your computer
with the display opened
You can select either an external display, LCD or simultaneous with
+ F3 .
In addition, you can set the display to use during start-up with the follow-
ing procedure.
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
Enter
5
Press F10 , then select [Yes]
( "Starting Up/Shutting Down")
( page 32)
, select [Main]
, select [Display] and press Enter
, select the display to use and press
25
page 27)
Fn