Configuring The Marker Beam - Intermec Sabre 1552 User Manual

c o d e 39
2. If you did not get a good read, adjust the scanner distance
from the bar code and the position of the laser beam to make
sure you scan every bar and space.
*HI*
INCORRECT
3. When you get a successful read, the laser beam turns off, the
scanner beeps twice (one beep for decoding the bar code and
another for successful transmission to the base station), and
the light turns green.

Configuring the Marker Beam

This section explains how to configure the marker beam on
long-range and high-visibility scanners. Scan one of the
following bar codes to turn the marker beam on or off:
12
*HI*
CORRECT
155XQRG.006