Intermec Sabre 1552 User Manual page 10

c o d e 39
Associating the Scanner to the Base Station
After a 3 to 4 second pause, the scanner will beep once and the
green light on the base station will flash. If the scanner beeps
three times after 3 to 4 seconds, the scanner did not associate to
the base. Make sure that there are no more than nine scanners
associated to the base station.
To enable you to associate the scanner when the base station is
out of reach, your base station was provided with a second
association label.
To improve RF communications, make sure that you follow the
next requirements:
•
When scanning, orient the scanner so that it is parallel to the
antenna on the base station.
•
Mount the base station so that nothing, particularly metal
objects, obstructs the signal between the base station and the
scanners.
10
Association
bar code
1552QRG.004