NAPCO Gemini GEM-P3200 Programming Instructions Manual page 58

Control panel/communicator
Hide thumbs Also See for Gemini GEM-P3200:
Table of Contents

Advertisement

Page 58
[Default = blank (•) blank (•) from address ADDRESS 3778-3801 &
2800-2895]
To program, follow the 5 steps below:
STEP 1: RELAY # OPTIONS:
96 available external relays from Relay Module RM3008. Multiple entries can
drive the same External Relay.
Select the relay number from Table 1 (shown on next page); enter in
corresponding left and right digit address locations.
Note: Entries 01-24 correspond to relays 1 through 24. If entries are zero, zero
(00), then relay number is identical to the relay/entry address table number, in the
selected address table(s) above.
STEP 2: AREA OPTIONS:
Select the area from Table 2 (shown on next page); enter in corresponding left and right digit
address locations.
STEP 3: TIMEOUTS:
Each relay event can be assigned a timeout depending on Alarm Type option.
If Alarm Type (see next page) is selected for timeout in minutes or seconds, select the timeout from Table
3 (shown on next page) in minutes or seconds and enter in corresponding address location (left digit and
right digits). To choose seconds or minutes, see step 5A below. 254 is maximum entry.
STEP 4: EVENT ID CODES:
Select 2-digit Event ID from Table 4 (see page 60); enter in corresponding address locations (left and right digit).
STEP 5: RELAY EVENT CONDITION OPTIONS:
condition; also, select a timeout type for each.
5A. Select Alarm Type and Timeout Type from Table 5A (see page 61); enter in corresponding address location (left digit).
NOTE: Select Timeout from Step 3.
5B. Select Activation from from Table 5B (see page 61); enter in corresponding address location (right digit).
X
GEM-P3200 Programming Instructions
EXTERNAL REL AY CONTROL
Each relay/entry can be assigned to any of the
Each relay/entry can be assigned to Area 1 or 2 or all areas.
Each relay event can be assigned any of the available event IDs from the table.
Each relay event can be assigned an alarm type; and an activation
WI1184B 2/06
RELAY EVENT OPTIONS
RELAY # AREA Timeout Event ID
L
R
L
R
L
R
L
R
(•)
(•)
Step
Step
Step
Step
1
2
3
4
L
NAPCO Security Systems
COND.
L
R
Step
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents