NAPCO Gemini GEM-P3200 Programming Instructions Manual page 12

Page 12
E n t e r u s e r c o d e
0 0 1 1 2 3 4 5 6 - 6 -
User# User Code
Press the button to set the cursor to the User Code. Use the number buttons
R
a 6 digit code. Enter the digits in the first six boxes from left to right for each user code. Valid entries are: 0-9.
Note: Press the
0
Refer to the tables below and WI1221 for the available User Level data entries. Enter the level data in the right
digit. Leave blank (•) in the left digit. Note: For entries greater than 9, press the
buttons for B through F, respectively.
G5
For ACM Area, enter data for area 1-4 in the right digit and data for area 5-8 in the left digit. See table below.
Example: Enter a code of "123456"
as "123456" (from left to right).
X
GEM-P3200 Programming Instructions
Enter Proximity Card Users (FOR ACM USE ONLY).
(Press the
R
Enter up to 48 Proximity Cards with User Options, Access Level and ACM
Area (if necessary) for each card. Refer to the tables below and to WI1221 for
more information.
button for a zero. No blank spaces in between; leave blank (•) any trailing boxes.
USER CODE
(UP TO 6 DIGITS)
DATA ACCESS CODE
ENTRIES LEVEL TYPE
blank (•) 0 NONE
1 1 NONE
2 2 NONE
4 0 ARM/DISARM
5 1 ARM/DISARM
6 2 ARM/DISARM
8 0 ARM ONLY
9 1 ARM ONLY
0 2 ARM ONLY
button to set cursor). See WI1221 for more information.
USER OPTIONS
USER
LEVEL
DATA
ENTRIES
blank (•)
Note: "Y" indicates option is enabled.
L
WI1184B 2/06
through
1 9
buttons through the
G1
ACM AREA
ACM AREA
A1 A2
NONE
1 Y
2 Y
3 Y Y
4
5 Y
6 Y
7 Y Y
8
9 Y
0 Y
B Y Y
C
D Y
E Y
F Y Y
NAPCO Security Systems
to enter