Deleting A Light From Your Network; Groups; Creating Or Adding A Light To A Group - GE 45633 User Manual

part of your home control network and can be controlled through
the GROUP, SCENE and ALL commands.
1. Enter Setup and select LGHT SETUP.
2. Press OK followed by either arrow key and select REMOVE.
3. Press OK. The screen will display SEL DIGIT.
4. Press a number key (1-9) for the device location you wish to re-
move. Press SHIFT and the number key (1-9) if you are removing
devices 10 through 18.
5. Press OK. The screen will display SUCCESS.

Deleting A Light From Your Network

This completely removes the device from your home control
network and if it is a GE brand device, resets it to its factory default
settings.
1. Enter Setup and select LGHT SETUP.
2. Press OK followed by either arrow key and select DELETE.
3. Press OK. WAITING will be displayed in the lower right corner of
the screen.
4. Press the button on the device to be deleted so that it communi-
cates with the remote.
5. When the screen displays SUCCESS, you have successfully
deleted the light from your network.

GROUPS

Groups are a collection of lights that you can control with one but-
ton. You can set up a maximum of 18 groups.
Add

Creating or Adding a Light to a Group:

1. Enter SETUP and select GRP SETUP.
2. Press OK. The screen will display ADD.
3. Press OK. The screen will display SEL DIGIT.
4. Press the number key (1-9) for the group you wish to add the de-
vice to. Press SHIFT and the number key (1-9) if you are adding a
device to groups 10 through 18.
5. Press OK. The screen will display GROUP X and WAITING.
6. Press the button on the device so that it exchanges information
with the remote.
7. When the screen displays SUCCESS, you have successfully
added the device to your group.
GRP SETUP
Remove
13
Delete
Label