Random Events; Disabling/Re-Enabling An Event; Reviewing Events; Deleting An Event - GE 45633 User Manual

control.
10. Press OK. The screen will display ON TIME.
11. Adjust the hour by pressing the #1 key.
12. Adjust the minutes by pressing the #2 key.
13. Adjust the AM/PM setting with the #3 key (12 hr mode only).
14. Press OK. The screen will change to OFF TIME.
15. Repeat steps 11-14 to set the OFF TIME.
16. Press OK to save this event. The screen will display SUCCESS.

Random EVENTS:

Choose RANDOM in step 7 above to have the EVENT start +/-15
minutes of the Scheduled Time. Continue the programming as
shown in step 8 above.

Disabling/Re-enabling an EVENT:

Once an event has been programmed, it can be disabled or re-
enabled as desired.
1. Enter SETUP and select EVENTS.
2. Press OK. The screen will display ADD.
3. Use either arrow key to select ON-OFF.
4. Press OK. The screen will display SEL DIGIT.
5. Press the number key for the event you want to
disable/re-enable.
6. Press OK.

Reviewing EVENTS:

1. Enter SETUP and select EVENTS.
2. Press OK. The Screen will display ADD.
3. Use either arrow key to select REVIEW.
4. Press OK. The screen will display SEL DIGIT.
5. Press the number key for the event you want to review and then
press OK.
6. The screen will change to show the event profile set in step 3 of
Adding an EVENT.
7. Each subsequent press of the OK button will change the screen
to display the various settings for the selected event.

Deleting an EVENT:

1. Enter SETUP and select EVENTS.
2. Press OK. The Screen will display ADD.
3. Use either arrow key to select DELETE.
19