Connecting To Your Dvr Over The Internet On Pc Or Mac; System Requirements; Step 1 Of 3: Connect Your Dvr To Your Router - Lorex LH150 ECO4 SERIES Instruction Manual

16 Connecting to Your DVR Over the
Internet on PC or Mac
This DVR features connectivity using the exclusive Lorex Stratus Connectivity. This cloud-
enabled service allows for Internet connectivity without requiring any network configura-
tion. Up to 3 devices may connect to the system at the same time.
This section refers to Internet setup on PC or Mac, for smartphone/tablet setup, see 18
Mobile Apps: Accessing your DVR Using a Mobile Device, page 99.

16.1 System Requirements

Prior to using Lorex Stratus Client, make sure your system meets or exceeds the following
system requirements:
Description
CPU
Operating System
Memory
Video
Network (LAN)
Network (WAN)
Browser
1. For the latest compatibility list, check
sions are released to the market
2. An upload speed of 1Mbps is recommended for best video performance
3. If a user connects to the system remotely, there may be slow performance when ac-
cessing the system locally. This is normal, and not a malfunction.

16.2 Step 1 of 3: Connect your DVR to Your Router

1. Power off your DVR by disconnecting the power adapter.
2. Connect an Ethernet cable (included) to the LAN port on the rear panel of the DVR.
Connect the other end of the Ethernet cable to an empty LAN port (usually numbered
1~4) on your router.
#LX400012; r. 2.0/12066/12066; en-US
Requirement
Pentium® 4 or above
Windows 7/8 Mac OSX 10.6.6 and above (Intel
processors only) 1
256 MB RAM or greater
16 MB of video memory
10/100 BaseT Network
384 Kbps upload2
Safari 6.0 and above (Mac)
www.lorextechnology.com, as new software ver-
1
72