Configuring Snapshot Recording Settings - Lorex N882A63B User Manual

16 Using the Main Menu
To view camera PoE status:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click , then click REMOTE DEVICE. Click the POE MANAGER tab on the
side panel.

16.2.5 Configuring Snapshot Recording Settings

The system can be set to record snapshot images when a camera detects motion. These snapshots
can be viewed through the Playback menu or can be attached to email alerts and push notifica-
tions. Use the following procedure to set the snapshot parameters for each camera.
NOTE
Snapshot recording must be enabled for motion detection in the Event menu. See 12 Motion Detection, page 37
for details.
To configure snapshot recording settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
#LX400117; r. 6.0/57895/57895; en-US 56